Pasta shapes - linguini, fusilli and maccheroni
From Sam J Wiki
Revision as of 10:03, 6 August 2021 by Watkinsj (Talk | contribs) (Created page with " Other recipes This recipe is designed for use with the Kenwood Pasta shaper. Swap in the die for the shape you want/need. = Pasta shapes using dies = == Ingre...")
This recipe is designed for use with the Kenwood Pasta shaper. Swap in the die for the shape you want/need.
Pasta shapes using dies
Ingredients
- 200g 00 pasta and pizza flour
- 100g egg beaten (typically 2 medium eggs)
Directions
Put floor in bowl of mixer wtih the K-beater. Gradually add egg on minimum sooed increasing to 1.
Mix for 30-40 seconds then scrape down.
Mix for a final 30 seconds. The mixture should reasemble coarse breadcrumbs.
Now remove bowl and add pasta shaper to the machine in its place, with the die you desire to make the shapes you want. Set the speed to 2 or 3 and start to feed in your mix. Remember to cut the pasta to the desired length using the cutter.
